Obninsk: +7 (484) 399-62-73
Moscow: +7 (499) 550-66-82

Contact information

Fibercement board СEMBOARD HD

СEMBOARD is a perfect plate for ventilated facades. High quality and uninflammable boards are applicable in agricultural construction sites, greenhouses, as well as the retained formwork of the foundations.


СEMBOARD is shock resistant, like a concrete slab; does not rot and is not exposed to UV-rays. It's resistant to the impact of insects and fungi. The surface of the board is smooth (natural grey). Plates can be painted on site before or after mounting.

Storage and transportation

СEMBOARDs must be stored in dry conditions on a flat surface. The height of one stack should not exceed 1 meter. The boards must be protected from moisture and dirt by polyethylene film at the construction site . The boards should be rised by two workers (at both ends) and transported in a vertical position.


Installation should be free of tension and bending of boards. Internal voltage can cause the destruction of plates in the field of attachment to the supporting structure. The holes for the mounting board must be drilled diameter of at least 3 mm more than diameter of screws or rivets. Fasteners must be installed at a distance of not less than 30 mm from the edge of the plate.

Processing of the surfaces of boards

Plates СEMBOARD are natural-grey color, so they are not always homogeneous. Plates can be painted at the construction site, in accordance with the specific instructions in colour.


8x1195x3050 mm
10x1195x3050 mm

Materialfibercement board
Weight13,2 kg/m2
16,5 kg/m2
Apparent density1,65 g/sm3
Bending strengths,
Dry with grain
Dry across grain
Wet with grain
Wet across grain

26 Mpa
17 Mpa
18 Mpa
12 Mpa

Bending modulus of elasticity15 000 N/mm2
Interlaminar bond50 N/mm2
Humidity content4.0% mass. at 20% of relative humidity  and 10% mass. at 95% relative humidity
Humidity expansion2,0 mm/m at 30—95% relative humidity
Coefficient of thermal expansion0,01 mm/ moK
Heat conductivity0,6 W/ moK
Vapour permeability240 ng/m2 s Pa at 0—50% relative humidity
120 ng/m2 s Pa at 50—100% relative humidity
Frost resistance100 cycles
Fire ratingA1 in accordance with EN 13501
Temperature range Max 120°С